Easy Zipper Tutorial

IMG_2284-0I mentioned in an earlier post, Becoming an Expert Seamstress, that when making a pair of pants for the first time in 8 or 9 years, I realized I had totally forgotten how to sew a fly-front zipper. I found a really good YouTube tutorial on an easy way to do it. Click HERE for the link to the video. Trust me, it’s something you wanna watch. I broke it into steps for this post, but this is really intended as a refresher on what the steps are once you’ve seen her video.

I’m doing this as a blog tutorial because once I began sewing the zipper in the pair of pants I’m working on, I went to her video again and I thought I should make a cheat sheet on the steps she uses until I memorize the process. Then I thought if that would help me, it would probably help you, too, and that’s the story of why I had to seam rip the zipper out of these pants and start again to get photos of each step.

These pictures are of my olive palazzo trousers. You can check out the post on the waistband by clicking the picture below.IMG_2346

Before we begin, this super easy method only works with a pattern that has the fly extension built into the pants pattern as one piece.

Step 1: Serge the edge of the fly extension and front crotch seam. The Youtube video doesn’t actually show that part,  her edges are already serged when she starts the video. If you don’t have a serger, no prob, Bob! Just sew a fairly tight, wide zig-zag stitch along the  edge, making sure the needle goes over the fabric edge so it overlocks the raw edge.

Unnecessary Sidebar: My serger and I are frenemies. Like, I hang out with him. But only because I know I need him.  It’s definitely love/hate with that guy. I’m getting a little braver as I get  to know him more, though.IMG_2244

Step 2: Measure the extension. How far does it go out from Center front? Put a notch at the CF. Mine is about 2″ out. Mark how far down the zipper stop is.IMG_2243

Step 3: Sew the front inseam up to the point the of the notch you just made for your zipper pull. Backstitch.  Then sew the rest of the way up to the notch you made at the top for the CF point, using a basting stitch (the longest stitch you have on your machine.) You can mark a sewing line with tailor’s chalk if it makes it easier for you.IMG_2245

IMG_2246

IMG_2248

IMG_2249

IMG_2250

Step 4: Press open the seam you just made.IMG_2252

IMG_2251

Step 5: Place your zipper face down on the left pant leg fly, so the teeth are touching the Center Front seam and sew (just to the fly extension layer,) using your regular presser foot so the stitch isn’t too close to the zipper teeth. On her tutorial, Diane opens the zipper so she can sew closer to the teeth once she gets to the pull. To do this, make sure your needle’s down and raise your presser foot to slide down the pull a little, then lower your foot and sew to the end.IMG_2253I had to shorten this zipper. If you don’t know how to do it, just measure how long you need it to be and hand or machine sew the new stopping point. Make sure it’s secure because this becomes your actual zipper stop.

IMG_2255

IMG_2256Ah, see, once again Scotch tape works for everything! 

IMG_2262

IMG_2265

IMG_2258

Step 6: Flip the zipper over so  and topstitch beside the row of stitching you just made to attach the zipper. Switch to a zipper foot for this step. You end up with one side of the zipper tape being folded under and topstitched.IMG_2247On the left is my normal foot and the zipper foot is on my right. If you’ve never used a zipper foot before, watch a tutorial or look it up in your machine’s manual.  You’ll be glad you did!

IMG_2266

IMG_2267

IMG_2268

Step 7: Open the pants and turn the fly extension with the sewn zipper over so it’s on top of the fly extension for the other pant leg. Fold the edge of the sewn extension back, pin it in place and sew the zipper to the other fly so it’s attached to both.IMG_2269

IMG_2270

IMG_2273

IMG_2272

Step 8: Topstitch on the right pant leg, using your normal presser foot. (If you’re looking at the pants from the front, it will be on your left.) If you’re new to this, it may be best to have a line drawn where you want to stitch.  This will be the decorative backwards J shape we all associate with fly front pants. To do this,  sew straight down from the top so you catch the extension underneath. Mark or pin on the front of the fabric where you made the notch at the zipper stop point. This is where your stitching will curve in toward the crotch. Lift your presser foot up at this point and turn the other extension you had pinned back so that it will be sewn in the curve, as well.IMG_2274

IMG_2277

Step 9: Take out your basting stitch and iron out the crease on the left pant leg.IMG_2278-0

IMG_2279-0

IMG_2280

IMG_2277-0

IMG_2281-0

IMG_2284-0

Ok, so 9 may seam like a lot of steps for an easy zipper, but they’re all baby steps and this method only uses 4 seams! That’s pretty good. I love bullet points and steps written down to remind me of a process untill I have it down, and now it’s available for you guys-and myself-to use on our fly front pants. I hope I did Diane’s tutorial justice. She is such a wonderful teacher and I can’t wait to watch and try her other videos. (There’s one on smocking I’m very interested in…I just don’t know if I have the patience to smock. Mocking, however, is a different story. If there was a mocking tutorial, I’d Nail IT! For sure.)IMG_2282-0

IMG_2285-0

IMG_2276-0

Happy Sewing! And a Special Thanks to Diane Deziel and herYou Tube Video.

One thought on “Easy Zipper Tutorial

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s